Devices to indicate flow and flow rates. Temperature readers with both surface and inline sensors. Information can be read directly, in the BIOS or by suitable readers, such as the Fan-O-Matic range.
A visual flow indicator. Available in blue (as shown) or black.
This electronic flow sensor connects to the CPU fan header on the motherboard. If flow fails, then there is an IMMEDIATE shutdown or alarm, depending on the motherboard features.
Providing you have a top end controller, such as the Fan-O-Matic, then this turbine flow meter will measure the flow rate in litres per minute and provide shut down in the event of flow failure.
If not, see the PulsMatic below.
Converts the signal from the flow turbine rev2.0 above so that the BIOS reads litres per minute rather than the original fan's revs per minute.
Provides a signal in litres/min directly into the motherboard header. Internal blue light. Complete with connectors.
Click here for more product information
A blade type temperature sensor for attaching externally to a hot body. Suitable for Fan-O-Matics and similar equipment.
Measures the coolant flow temperature with a suitable reader, such as the Fan-O-Matic range. Accepts the standard tubing at both ends.
Screws directly into a waterblock or radiator.
A direct reading thermometer using either a single or dual blade sensors plus a unit with one blade and one inline sensor. Powered by a 4 pin Molex connection.
A direct reading thermometer using either a single or dual inline sensors plus a unit with one blade and one inline sensor. Powered by a 4 pin Molex connection.
Twin direct reading thermometers using either a single blade or inline temperature sensor. A choice of blue or orange back lighting. Switchable between degC and degF. Powered by a 4 pin Molex connection.
